Applies to: Reolink RLC-422, RLC-422W.
The following steps describe how to install the bracket for Reolink RLC-422 and RLC-422W.
Here is a video for your reference:
Step 1. Use a wrench to loosen the three screws on the dome cover, then take the dome cover off.
Step 2. Thread the cable through the bracket, coincide the four screw holes of the camera with the ones of the bracket, then screw the screws tightly to combine the camera with the bracket firmly.
Step 3. Put the dome cover back and screw the knobs tightly.
Step 4. Install the camera in the position you want.
Comments
0 comments
Article is closed for comments.