Applies to RLC-210W.
Note: Cable connection between RLC-210W to a Wi-Fi NVR is only needed when connecting RLC-210W to Wi-Fi NVR for the first time or after resetting RLC-210W.
Here are the steps:
Step 1. Power up the RLC-210W camera and Wi-Fi NVR. Connect Wi-Fi NVR with the monitor via HDMI or VGA.
Step 2. Plug RLC-210W camera into the Wi-Fi NVR LAN port via Ethernet cable.
Step 3. Reboot Wi-Fi NVR by unplugging and plugging its power adapter manually.
Step 4. On live view page, click at the bottom to access the device list page and check whether RLC-210W is shown on the list.
Note: Make sure the camera’s status is previewing.
Step 5. Close the “Device List” page and go back to live view page, right-click on it, then click at the bottom of live view page and click “Network” >> “WiFi Setting” >> “Sync”.
Step 6. Select all channels and click “Apply”.
Step 7. Remove network cable between RLC-210W and the Wi-Fi NVR. wait for a moment, they will be connected by Wi-Fi.