Follow this guide to enable/disable the alarm buzzer (beep) for motion detection, video loss or other circumstances you might encounter.
Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)
For Motion Buzzer
On NVR monitor, go to Menu > Alarm > Motion > Action, and check Buzzer for the selected cameras (channels). Then click Apply to save the settings.
For Video Loss Buzzer
On NVR monitor, go to Menu > Alarm > Video Loss > Action, and check Buzzer for the selected cameras (channels). Then click Apply to save the settings.
For Exception Buzzer
On NVR monitor, go to Menu > Alarm > Exception > Action and select the circumstance for triggering a buzzer. Then check Buzzer and click Apply to save the settings.