How to Enable/Disable Alarm Buzzer for PoE NVRs

Follow this guide to enable/disable the alarm buzzer (beep) for motion detection, video loss or other circumstances you might encounter.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

For Motion Buzzer

On NVR monitor, go to Menu > Alarm > Motion > Action, and check Buzzer for the selected cameras (channels). Then click Apply to save the settings.

For Video Loss Buzzer

On NVR monitor, go to Menu > Alarm > Video Loss > Action, and check Buzzer for the selected cameras (channels). Then click Apply to save the settings.

For Exception Buzzer

On NVR monitor, go to Menu > Alarm > Exception > Action and select the circumstance for triggering a buzzer. Then check Buzzer and click Apply to save the settings.

Helpful？

Thanks for your feedback! You can click again to cancel and feed back again.

Yes

Sorry about that. We'll be grateful if you can provide some advice.

Thank you for your feedback. Please leave your email address so that we can get in touch with you when necessary.

I've read and understood the Terms & Conditions and Privacy Policy , and I understand that Reolink will use my personal data (email) to facilitate my authentication.

submit

You have clicked too often. Please try again tomorrow.