Applies to: Reolink PoE NVR
You may follow this guide to enable/disable alarm buzzer (beep) for motion detection, video loss or other circumstances you might encounter.
For Motion Buzzer
On NVR, go to Menu >> Alarm >> Motion >> Action, and check Buzzer for the selected cameras (channels). Then click Apply to save the settings.
For Video Loss Buzzer
On NVR, go to Menu >> Alarm >> Video Loss >> Action, and check Buzzer for the selected cameras (channels). Then click Apply to save the settings.
For Exception Buzzer
On NVR, go to Menu >> Alarm >> Exception >> Action and select the circumstance for triggering a buzzer. Then check Buzzer and click Apply to save the settings.
Comments
0 comments
Article is closed for comments.