How to Add Reolink Cameras to Synology Surveillance Station

Applies to: All IP cameras( Reolink E1 Pro& E1 Zoom are included) except for all Reolink battery-powered cameras, Reolink E1, B400, D400, B800, D800, and Reolink Lumus, and POE NVR systems

You may follow the steps below to add Reolink cameras to Synology Surveillance Station.

Note: Reolink battery-powered cameras are not compatible with third-party software such as Synology Surveillance Station and NAS. Please refer to Why Reolink Battery-Powered Cameras Cannot Work with 3rd-Party Software

Step 1. Launch Reolink Client and log into your Reolink camera or NVR, then click on  to open Device Settings.

Step 2. Go to Recording -> Encode and select Baseline for H.264 Profile.

Step 3. Launch Synology Surveillance Station, click IP Camera, and Add new cameras.

Step 4. Select Quick Setup and click Next.

Step 5. Fill in the blanks and then click Test Connection to make sure the information you entered is correct. If the test succeeds, click Finish and wait for the camera to show up.

Note: The Reolink default ONVIF port is 8000. If you have changed the port, click here to see how to obtain its current value. 

Now you have successfully added the camera to Synology Surveillance Station. Click Live View to access your Reolink camera.

You may also use Reolink Client or Reolink App for local or remotely access of Reolink Products.