You may follow the steps below to add Reolink cameras to Synology Surveillance Station.
Note: Reolink battery-powered cameras are not compatible with third-party software such as Synology Surveillance Station and NAS. See why.
Step 1. Launch Reolink Client and log into your Reolink camera or NVR, then click on to open Device Settings.
Step 2. Go to Recording > Encode and select Base Line for H.264 Profile
Step 3. Launch Synology Surveillance Station, click IP Camera, and Add new cameras.
Step 4. Select Quick Setup and click Next.
Step 5. Fill in the blanks and then click Test Connection to make sure the information you entered is correct. If the test succeeds, click Finish and wait for the camera to show up.
Note: The Reolink default ONVIF port is 8000. If you have changed the port, click here to see how to obtain its current value.
Now you have successfully added the camera to Synology Surveillance Station. Click Live View to access your Reolink camera.
See more about how to access Reolink products via a third-party software.