Applies to: All Reolink WiFi NVRs

The following steps describe how to upgrade firmware for Reolink cameras/WiFi NVRs via Reolink WiFi NVR.

Note: Please make sure that you have already downloaded the firmware (choose the correct model and version according to your devices) from Reolink Download Center before upgrading.

Step 1. Unzip the firmware file (.pak file) on your PC and transfer it to a USB, then insert the USB to the NVR USB port.

Step 2. Log in to your Reolink WiFi NVR on an NVR monitor, then go to Device Settings -> System -Maintenance page.

Maintenance Page

Step 3. Choose the correct firmware file and start to upgrade.

  • If you only want to upgrade the firmware for the NVR, you may click the Upgrade From Local and select the correct firmware file, then tap on the Upgrade button.
  • If you need to upgrade the firmware for cameras that are connected to the WiFi NVR, please choose Upgrade IPC From USB, then select the correct firmware for each channel and click on the Upgrade button to start upgrading.

You may also upgrade firmware for Reolink Cameras/WiFi NVRs by using other methods. Check details in: