You may follow the steps below to quickly set up or change the record schedule for your camera on the Reolink App.
Applies to: All Reolink cameras with micro SD card or SD card slot except the battery-powered cameras which only support the PIR detection.
Step 1. Log in to the camera and go to Settings > Camera Recording page.
Step 2. Please enable Camera Recording first, and then click Schedule enter the schedule page, select a time column you want to set a schedule for your camera, then switch to the next page.
- There are four detection types: any motion, person, vehicle, and pet. Please note that the detection types vary from different models of your camera, and some cameras (8MP and 12MP) support setting the recording for your pet. For some models which do not support smart detection, there is no detection type that can be chosen.
- Alarm means setting recordings for motions, and Timer means setting continuous or 24/7 recordings.
- To set up the Smart person/Vehicle detection feature via the app for the stand-alone camera, please make sure you had inserted a Micro sd card( up to 256 GB) into this camera and also update your phone app to the latest version( app version 4.24.0.10 or above).
- If you choose Any Motion only, then it will only detect normal motions and you can't see Person or Vehicle detection while playback.
Step 3. Check on Enable under the Status option, and select a time to enable the record schedule per your requirement.
Click Copy To to copy the settings to other days, then click the Save button on the top-right corner to save the settings.
Comments
0 comments
Article is closed for comments.