How to Access Reolink PoE NVRs Locally via a Web Browser

Applies to: All Reolink PoE NVRs

Please follow the steps below to access Reolink PoE NVRs via a browser on local network.

Step 1. Find the IP address of your PoE NVRs.

If you don't know the IP address, you may check the IP address of your device via Reolink Client or on Reolink App or on NVR monitor

Note: If you reboot your router or your device has been off-line for too long, the IP address of your device may change and the port that you forward may become invalid. To avoid the problem, you may assign a static IP address for your device or use Dynamic DNS to access your device.

Step 2. Open a compatible browser and input the IP address in the address bar, input the username and password of your NVR, then click Login to live view your device.

Note: If there is a pop-up that prompts you to install a plugin on webbrowser, click “Install” to install it.

After the plugin is successfully installed, please restart the browser and enter the IP address to log into your Reolink NVR again.

If you fail to load the above pages, you may add the HTTP Port to the end of the IP address. For example, if your HTTP port is 88, then the URL should be 192.168.1.103:88. Refresh the page and you should see Reolink login interface.

Note: If you don’t know the HTTP port of your device or you have changed the port number, click here to see how to find their current value via Reolink Client.

See more details of accessing Reolink products via web browsers:

• How to Access Reolink cameras Locally via a Web Browser
• How to use Public IP/DDNS Access Reolink Cameras & NVRs Remotely on the Web Browser