Applies to: All Reolink NVRs
Please connect your Reolink NVR to a monitor via HDMI or VGA and follow the steps below to access Reolink NVR via IE browser on local network.
- ReolinkNVR only supports Windows IE browser.
- Please connect your Reolink NVR to a monitor via HDMI or VGA to enter the NVR interface.
Step 1. Launch your NVR interface, go to Menu -> Network -> General to check the IP Address of the NVR.
Step 2. Open IE browser and input the IP address in the address bar, input the username and password of your NVR, then click Login to live view your device.
Note: If there is a pop-up that prompts you to install a plugin, click “Install” to install it.
After the plugin is successfully installed, please restart the browser and enter the IP address to log into your Reolink NVR again.
If you fail to load the above pages, you may add the HTTP Port to the end of the IP address. For example, if your HTTP port is 88, then the URL should be 192.168.1.103:88. Refresh the page and you should see Reolink login interface.
Note: If you don’t know the HTTP port of your device or you have changed the port number, click here to see how to find their current value via Reolink Client.
See more details of accessing Reolink products via web browsers: