Applies to: All Reolink cameras (exclude battery-powered cameras).
The following steps describe how to set up local record schedule via Mac Reolink Client.
- Local record schedule only applies to the cameras you have logged in.
- If you need to set up motion detection recording, please set the motion detection area and motion detection sensitivity first.
- The local recording will work only when Reolink Client is running. If the PC enters sleep mode, it may stop working.
Step 1. Launch the Reolink Client and then go to the local record settings page.
Step 2. Check the Enable Local Record Schedule box to enable local recording, then choose the record type (Normal, M.D and None) and tap on the grids to set the recording schedule. And then the camera will start to record according to the different record type you choose.