Applies to: RLC-422/422W
You may follow the steps below to mount RLC-422/422W.
Step 1. Take out the mounting template and stick it to the roof/eave. Drill the holes, and insert the anchor into the holes.
Step 2. Take out the mounting wrench, loosen the three screws on the dome cover, and take the dome cover off.
Step 3. Take out the mounting screws, and screw in the camera holes to mount the camera onto the roof or the eave.
Step 4. Loose the screws on the two sides to adjust the camera shooting angle and re-install the cover taken off in step two.
Congratulations! Now you have successfully mounted the camera!