Applies to: Reolink solar panel.
You may refer to the following steps to connect your Reolink solar powered cameras to a Reolink solar panel to get non-stop power.
Step 1. Please select a position with the maximize sun light exposure throughout the year for your solar panel.
For Reolink solar panel, it only needs a few hours of direct sunlight exposure to sufficiently power your camera daily. The amount of energy that the solar panel can generate is affected by weather conditions, seasonal changes, geographic locations, etc.
Step 2. Mount the bracket with the mounting template and the screws provided in the package.
Step 3. Slot the solar panel into the bracket and make sure that it's secure.
Step 4. Loosen the adjusting control on the bracket and adjust the angle of the solar panel to make it receive direct sunlight exposure, then tighten the adjusting control to fix the solar panel.
Step 5. Connect the solar panel to a Reolink camera with the micro USB cable.
Notes:
- Make sure that there is NO blocking on the solar panel. The energy harvesting efficiency drops drastically even when a small portion of the solar panel is shaded by other objects.
- Please don’t install the solar panel completely horizontally. Otherwise, your solar panel might accumulate dust and other debris easily. It’s advised to install the solar panel angularly to make it receive direct sunlight exposure.
- Wipe the solar panel regularly to remove the dust and debris.
- Make sure that the camera is plugged in all the way and that the waterproof wire cover protects the interface between the camera and the solar panel.
Comments
0 comments
Article is closed for comments.