Playback/Download Recordings via Reolink Client (Windows)

Applies to: Reolink cameras with Micro SD card slot.

Note: The actual interface will vary depending on the specific model.

Here we will guide you to playback recorded videos on Reolink Client by the following steps.

Step 1: Launch Reolink Client and login into your cameras/NVRs referring to the guides in the picture below, then click Playback button to enter the Playback page.

Step 2: In the right side menu, double click the camera you want to choose.

If you are using an NVR, click the camera icon to show the channel list, then double click the channel you want to playback.

Step 3: Set Type as All, choose a date and click Search to search for recorded videos. The date(s) has recordings will show in orange shade.

Step 4: Left-click the blue bar to select the time and then click the Play button to playback the recordings.

Step 5: Click the Save  button, and then check the recorded videos you want to download. Click on Download to start download videos one by one.

Note: After the downloading is finished, you can find the videos in the download path of the computer.

For the button near the download button, here is a brief introduction.

: click to cut the part of the recordings per your requirement. The way to cut the recordings, you can refer to cut and Backup videos on Windows Client.

: click to capture the image as you need when you playback the recordings.

:  click this button to exit the playback windows of this camera.