This article will guide you on how to add your cameras or NVRs to the Reolink App.
Applies to: All Reolink cameras and NVRs
1. Please download the latest app from the Download Center or scan the QR code to download and install Reolink App first. Also, make sure your devices are successfully connected to the Internet.
2. If your device has not been set up yet, please refer to the guide on initial setup for Reolink Cameras via Reolink App.
3. All Reolink cameras and NVRs, even if they are in different locations, can be added to the same Reolink APP, and there is no limitation on the number of cameras.
Step 1. Launch the Reolink App and tap "+" on the top right of the Devices page to add a new device.
Step 2. Adding the device by scanning the QR code on the camera is recommended, and you can tap Light to enable the flashlight when in a dark environment.
If you cannot scan the QR code, tap Enter to access your device with UID or IP/DDNS.
Step 3. For battery-powered WiFi cameras, tap WiFi Already Configured to access a camera that is already set up or tap WiFi Not Configured to process to WiFi configuration.
For other cameras, skip to Step 4.
Step 4. Input username and password and tap Login to access your device.
Note: The default user name is "admin", and the default password is blank. If you have changed or forgotten the password, you will need to reset your device.