For detailed information about all Reolink NVRs, Home Hubs, and supported IPC models, please refer to the following content. This helps you quickly identify compatible devices, streamline setup, and ensure optimal performance of their Reolink system.

Applies to: Reolink NVRs and Home Hub

  • For All Reolink NVRs

Please check: Introduction to Hardware Versions of Reolink NVRs

  • Reolink Home Hub

Please check: Reolink Home Hub Compatibility

  • For RLN8-410 (N7MB01) & RLN16-410 (N6MB01) with Firmware v3.6 and later

There are two ways to view the list of supported devices on the NVR monitor.

Method 1.

Step 1. Click the Add Device button on the live view page.add camera(live view)

Step 2. Enter the Add Device interface, click the question mark button next to How to Add Camera to NVR. Then click the Supported Devices button, and you will see the applicable devices. click supported devices

applicable device

Method 2.

Step 1. Click the Settings icon on the live view page.tap settings（live view）

Step 2. Click the Home section. Then click the Supported Devices button in the top right corner of the Home page to view the list of supported devices.

tap supported devices

supported device（home page）

Through the above steps, the Reolink-supported device list can be accessed to confirm which devices are compatible with the current system. This helps avoid issues caused by incompatibility, such as unavailable functions or unusable devices, and ensures a smoother experience when using Reolink products.