The Reolink Video Doorbell (Battery) offers a versatile solution for enhancing your home security. This guide focuses specifically on how to connect Reolink Video Doorbell (Battery) to existing chimes, ensuring a seamless integration and reliable performance.
1. Power Supply Requirements
Before wiring Reolink doorbell to existing chime, ensure that your existing power supply transformer meets the following specifications:
- Voltage: 8 to 24 VAC
- Frequency: 50/60Hz
- VA: 5VA to 40VA
Note: If your power supply voltage is below 8V AC or above 24V AC, it is recommended to replace the transformer with one that meets these requirements. Otherwise, the chime may not work properly.
2. Connecting Reolink Video Doorbell (Battery) to the Wired Chime
Step 1: Remove the Existing Doorbell
- Connection Diagram of the Existing Wired Chime System
-
Confirm Original System Functionality: When the old chime's doorbell button is pressed, the chime will ring.
-
Turn Off Power: Ensure the safety of the installation process by turning off the power to the doorbell in the circuit breaker panel.
-
Remove Doorbell: Carefully remove the existing doorbell from the mounting bracket.
Step 2: Install the Wedge (Optional for Better Camera View)
Install the wedge if the visitor is not centered in the camera’s view. Otherwise, skip this step.
- Use a wedge if:
The visitor is not expected to be in the center of the camera's field of view upon arrival.
Optimized Camera View Using a Wedge:
Installation Illustration of the Wedge:
- A wedge is not necessary if:
The doorbell is installed at an angle and the visitor will be centered in the field of view.
Installation Illustration Without a Wedge:
Step 3: Install the Reolink Video Doorbell (Battery)
- Connect Wires: Integrate the Reolink Video Doorbell (Battery) into your existing doorbell wiring system.
Note: Reolink provides black Jumper cables and Extension cables. The red wires in the diagrams are for illustration purposes only and do not indicate polarity. Please follow the wiring instructions carefully. The two jumper cables connected to the screws on the back of the video doorbell do not have a specific arrangement requirement. As long as the connections are made correctly, the order of the cables does not matter. Just ensure that the cables are securely attached to the screws for proper functionality.
-
Mount the Doorbell: Attach the Reolink Video Doorbell (Battery) to the mounting bracket.
-
Restore Power: Turn on the power switch at the circuit breaker panel.
- Connection Diagram of the Reolink Video Doorbell (Battery) After Connecting to the Existing Chime
Step 4: Complete Pairing on the Reolink App
- Open the Reolink App: Launch the Reolink App on your smartphone.
-
Navigate to Settings: Tap on the camera's settings icon
.
-
Chime Settings: Select "Chime" and then tap "Existing Chime Settings."
-
Automatic Chime Detection: Enable "Automatic Chime Detection." Follow the on-screen instructions to complete the setup process.
Step 5: Confirm Functionality
-
Test the Doorbell: Press the doorbell button to confirm that the chime rings as expected.
-
Troubleshoot: If the chime does not ring normally, go to "Existing Chime Settings" > "Advanced" Settings within the app to troubleshoot and configure the settings accordingly.
By following these steps, you can effectively integrate your Reolink Video Doorbell (Battery) with wired chime, providing both security and convenience for your home.
If you encounter any issues or need further assistance, don’t hesitate to contact our support team.