If you want to switch the Wi-Fi connection of your camera, this article will guide you on how to change Wi-Fi on Wi-Fi NVR for Wi-Fi cameras.
Applies to: RLN12W
Preparation of Conditions
1. NVR Monitor (The Wi-Fi switching feature is currently available only on the monitor; Reolink App and Reolink Client currently do not support it.)
2. Upgrade your NVR to the latest version.
3. B500W and B800W need to be upgraded to the latest firmware.
Change Wi-Fi Network Step-by-Step Instruction
Step 1. Clickto enter the NVR settings page. Then click Network > Wi-Fi. Select the camera under Device Connection(s) to switch the Wi-Fi and click its Settings button.
Step 2. Select the desired network to connect to in Other network(s). For example, choose the "Reolink_5G" Wi-Fi as shown in the image below.
Current Wi-Fi: It refers to the Wi-Fi network currently connected to the camera.
Saved network (s): It refers to the Wi-Fi networks that the camera has previously connected to.
Other network (s): It refers to other networks that can be detected but have not been connected to.
Step 3. Enter the "Reolink_5G" Wi-Fi password and click Confirm.
Step 4. Once completed, the current Wi-Fi will show that the camera is connected to "Reolink_5G," and it will be saved in Saved network(s).
Step 5. If the Wi-Fi is not detected and you want to add a network manually, please click on the blue text Manual input below, enter the Wi-Fi name and password manually, then click Confirm to save.
By following the steps above, you can successfully change Wi-Fi network on Reolink Wi-Fi NVR.
If you have any other questions, please contact Reolink Support.