Equipped with a high-capacity battery, Reolink TrackMix LTE Plus supports 24/7 recording. This article will guide you on setting up the recording schedule for Reolink TrackMix LTE Plus on Reolink App/Client.
On Reolink App
Step 1. Launch the Reolink App and log in to your camera.
Step 2. Tap the camera settings icon and go to Camera Recording > Schedule.
Step 3. Choose between Alarm and Timer mode.
Alarm mode stands for motion recording: the camera starts recording only when motion is detected. And you are free to select the detection types and set up the relevant recording schedule.
Timer stands for 24/7 continuous recording: the camera keeps recording.
If you enable the Smart Battery Mode, the camera will automatically apply different settings for continuous recording according to battery levels to extend the battery life.
With the Smart Battery Mode off, the camera will record at full frame rate regardless of battery levels. But the camera will stop recording automatically when the battery level is lower than 10%.
Step 4. After configuring the recording schedule, tap Save.
On Reolink Client
Step 1. Launch Reolink Client and log in to your camera.
Step 2. Tap the camera settings icon and go to Surveillance > Record.
Step 3. Choose between Alarm and Timer mode.
Alarm mode stands for motion recording: the camera starts recording only when motion is detected. And you are free to select the detection types and set up the relevant recording schedule.
Timer stands for 24/7 continuous recording: the camera keeps recording.
If you enable the Smart Battery Mode, the camera will automatically apply different settings for continuous recording according to battery levels to extend the battery life.
With the Smart Battery Mode off, the camera will record at full frame rate regardless of battery levels. But it will stop recording automatically when the battery level is lower than 10%.
Step 4. After configuring the recording schedule, tap Save.