If you need to restore your camera to factory default settings, or if you have forgotten your camera password and cannot log into any platform, resetting the camera can be a good solution.

Applies to: Reolink FE-W, Reolink FE-P.

Here is a video for your reference.

Step 1. Open the rubber cover on the camera and you'll find the reset button.

rubber_cover_on_fe_camera.jpg

Step 2. Press and hold the reset button with your fingernail or something sharp until you hear a short ringtone and voice prompt.

reset_button_.jpg

Step 3. Close and press the rubber cover firmly.

Here is an introduction to the differences between reset and restore.