You can enable pre-motion recording for your camera or NVR via a web browser. Please follow the guide below to set it up.

Applies to: All Reolink cameras and NVRs except for battery-powered cameras, E1, E Series E320, E1 Pro, E Series E330, Lumus, Lumus Series E430, and cameras in NVR kit.

Step 1. Input the IP Address of your camera/NVR on a web browser and log in to your camera/NVR. Then click the Device Settings gear icon on the top right corner.

See how to find the IP address of your camera/NVR.

1._log_in_via_web_browser.png

2._click_device_settings_icon.png

Note: Make sure your PC is connected to the same router as your camera/NVR.

Step 2. Go to the Surveillance > Record page. Click the button to enable Pre-Motion Record(turn it blue).

pre-motion_record_via_web.png

Notes:

  • Pre-Motion Record: The camera will start to record before the alarm event happens, and the pre-recording will last 4-8 seconds according to different models and hardware versions.
  • You need to Enable Record first before enabling Pre-Motion Record.