How to Set up the Push Interval via Reolink NVRs (New UI)

After setting up the push interval, you will receive only one push notification from the NVR during each customized interval even if the alarm is triggered multiple times. 

Applies to: RLN8-410, RLN16-410, and RLN36

Please note that this operation could only be done on NVRs with the hardware version N2MB02, N3MB01, N7MB01, H3MB18, N6MB01, and N5MB01.

Step 1. Log in to your camera on the NVR monitor and enter the live-view page. Click the Settings gear icon on the screen.

Step 2. Go to Surveillance > Push. Click the blue Settings of Push Notifications.

Note: You also need to enable the Push button on this page or you won't receive any notifications on your mobile phone.

Step 3. Click the drag-down arrow of Push Interval. You can select a wanted push interval.

For example, we choose 1 minute as the NVR push interval. Then you will receive only one push notification for one alarm type during the 1 minute even if such alarm type triggers the camera multiple times.

Note: You can set up a push schedule for your NVR so it will send push notifications to your mobile phone accordingly.