If you want your camera or home hub to stop recording to the microSD card or the NVR to stop recording to the HDD, you can cease it via Reolink Client.
Applies to: All Reolink devices.
Below are instructions that will guide you on disabling recording for your devices. Please install the latest Reolink Client on your PC before setting it up.
Stop Recording for Reolink Cameras:
Launch Reolink Client and log in to your camera. Then click the Device Settings gear icon. Enter the Surveillance > Record page. Click the blue Enable Record button to turn it grey.
Now the camera will stop recording to the microSD card.
Stop Recording for Reolink NVRs:
Launch Reolink Client and log in to your NVR. Then click the Device Settings gear icon. Go to the Surveillance > Record page. Click the blue Enable Record button to turn it off. When it turns grey, the NVR will stop recording to the HDD.
Note: If you just want one of the cameras (connected to the NVR) to stop recording, you should keep the Enable Record button blue, and scroll down on the Record page, and click Schedule to enter Schedule page. Select the camera and click the Enable Record button to turn it grey.
Stop Recording for Cameras Linked to Reolink Home Hub:
Lauch Reolink Client and log in to your device. Click first and then the Camera Settings gear icon. Go to Surveillance > Record page. Click the blue Enable Record button to turn it off. When it turns grey, the camera will stop recording.
Note: The record switch and schedule apply to each camera individually, so you cannot stop recording for all cameras linked to the Reolink Home Hub at once. You must stop them one by one.