For cameras with status LED such as E1 Outdoor, you can turn it on/off on the NVR monitor as long as you have connected the camera to the NVR.

Applies to: RLN8-410, RLN16-410, and RLN36.

Please note that this operation could only be done on NVRs with the hardware version N2MB02, N3MB01, N7MB01, H3MB18, N6MB01, and N5MB01.

Step 1. Log in to your camera on the NVR monitor and enter the live-view page. Click the Settings icon on the screen.


Step 2. Go to Camera > Audio and Light page. You can find a Status LED switch.

Click it to turn it blue to enable the status LED of the camera. Click the switch again if you want to turn off the status LED light of your camera.