How to Disable the Push for One of Cameras Connected with NVR (New UI)

In this article, we will show you how to disable the push notification for one of the cameras connected to the NVR.

Applies to: All Reolink cameras (except the battery-powered cameras) and NVRs.

If you don't want to receive a push notification for the camera(s) connected to the NVR, you could disable the push for that camera separately.

Before setup, please connect your NVR with a monitor.

Step 1. Click the Settings gear icon on the NVR live view page.

Step 2. Go to the Surveillance page. Click Daily Schedule of Push Notifications.

1.Surveillance_New_UI.png

Note: Make sure you have enabled Push Notifications on this page. Otherwise, you won't receive push notifications from any cameras.

Step 3. Choose the camera you don't want to receive push notifications from. Take TrackMix PoE as an example:

2._choose_a_camera.png

Step 4. Switch off the push notifications for TrackMix PoE as shown below:

4._disable_push_for_the_camera.png

Now the push notifications for TrackMix PoE have been disabled. You may repeat the previous steps to set it up for other cameras.

Tips: If you want to enable it again, just switch it on and set a schedule as in the picture below:

3._enable_push_for_the_camera.png