This section aims to guide you on how to power on/off different battery-powered cameras. If you happen to be unknown of the on/off method, please scroll down and find the answer you want.

Applies to: All Reolink Battery-powered Cameras.

Three approaches are applied to Reolink battery-powered cameras according to whether the battery is removable.

1. Power on/off the Cameras by Inserting/Removing the Battery

For cameras with a removable battery including Argus 2, Argus Pro, Reolink Go, Reolink Go Plus and Reolink Go Ultra, there is no direct power control button on the camera body to power on/off the camera. But there is a PIR button on the Reolink App, so you can enable/disable the PIR button to make the camera in working mode or standby mode

Note: Standby mode is also called sleep mode, which is a low-power mode for electronic devices. This mode saves significantly on electrical consumption compared to leaving a device fully on and, upon resuming, allow the user to avoid having to reissue instructions or wait for a machine to reboot.
Alternatively, if you want to turn on the camera or cut off the power totally, you can also insert/remove the battery to power them on/off. Refer to how to replace the battery of cameras.

2. Power on/off the Cameras by Switching on/off the Camera's Power Button

For the other battery-powered cameras shown below, which have a power switch on the camera body, you could follow two basic steps to power them on/off.

Step 1. Remove the cover on the power switch.

Step 2. Switch it to On/Off. Then secure the cover back. 

Below are selected pictures showing where the power switch is on different cameras.

  • Argus 2E

    2E_power_switch

  • Argus 3 Series

    Argus_3_pro_power_switch

  • Argus Eco

    Eco_power_switch

  • Argus PT Series

    Argus_PT_power_switch

  • Reolink Go PT Series

    Go_PT_power_switch

  • Reolink TrackMix / Reolink TrackMix LTE

    Loosen the screw and remove the cover, then turn off the power switch on the camera.
    Trackmix_power_switch
  • Reolink Duo / Reolink Duo 4G / Reolink Duo 2 / Reolink Duo 2 LTE

    Loosen the screw and remove the cover, then turn off the power switch on the camera.
    duo_power_switch

3. Power on/off the Cameras by Press the Power Button

  • Argus Eco Ultra/Argus Eco Pro

    Power on: Press and hold for 2s

    Power off: Press and hold for 5s 

    Power+Reset Argus Eco Ultra

  • Argus 4/Argus 4 Pro

    Power on: Press and hold for 2s

    Power off: Press and hold for 5s 

    reset Argus 4 pro

  • Reolink Altas PT/Altas PT Ultra

    Power on: Press and hold for 2s

    Power off: Press and hold for 5s 

    reset altas

  • Reolink Doorbell Battery

    Power On/Off: Press and hold the Power Button for 5s.

    power on off doorbell battery