If you are eager to know how to install RLC-523WA or RLC-823A, check out this article and follow the steps below. You will find it quite easy. 

Step 1. Drill holes in accordance with the mounting hole template (included in the product box).

1.drill_holes_on_wall.png
Note: Use the drywall anchors included in the package if needed.

Step 2. Install the mount base with screws included in the package.

2.screw_camera_on_wall.png

Notes: 

  • Run the cable through the cable notch on the mount base.
  • As for the WiFi camera, it is recommended that the antennas be installed upward or horizontally for better WiFi connection.

Step 3. You may control the camera to pan and tilt via Reolink App or Client to change the camera's direction. 

3.adjust_view_angle.png