Here are some frequently asked questions about the Ethernet cable. Please check to see if your question is addressed below.

If you have any additional questions, feel free to contact us.

  • Can two cameras be connected via one Ethernet cable?

    No, two Reolink cameras cannot be connected via a single Ethernet cable directly. Each camera requires its own Ethernet cable to connect to the network. However, you can use a network switch or an Ethernet splitter to connect multiple cameras, allowing you to run one cable to the switch or splitter and then branch out to each camera. If using an Ethernet splitter, be aware that Reolink's Ethernet splitter PLA-PoECS1 has model compatibility requirements. Other brands of splitters have not been tested, so their compatibility cannot be guaranteed. It is recommended to purchase a high-quality Ethernet splitter and cables for the best connection.

  • Can I use a 3rd-party Ethernet cable with Reolink devices?

    Yes. You can use any other 3rd party Ethernet Cable that meets the wiring standard of your choice.

  • What Ethernet cable can work with Reolink devices?

    Reolink devices support T-568B connectors and CAT5, CAT6, and CAT7 with 8 PIN Ethernet cables. You can purchase an Ethernet cable from Reolink's official website: Reolink - Ethernet Cable.

    The maximum Ethernet cable length of the Reolink devices is 80 meters (CAT 5, about 262 feet). If you use the higher standard cables, then the supported cable can be longer. The maximum cable length is no more than 270 feet.

    Click to check more details about the Ethernet cable: Getting Started with Ethernet Cable

  • The Ethernet cable length requirement is up to 270 feet. Does this refer to the length of a single cable or the total length?

    It refers to the signal Ethernet cable that connected to Reolink devices should ideally not exceed 270 feet.

  • What is the Reolink Ethernet cable length in the order/package?

    For the standalone cameras, there is a 1m(3.3ft) Cat5e Ethernet Cable included in the package.

    In the standard NVR kits, there is a 1m(3.3ft) Cat 5e Ethernet Cable and one 18m(59ft) network cable for each camera.

    Note: Bundle kits may not include 18m cables. Please check What's in the Box on the product overview page or contact Reolink Support Team to confirm.
    what is in the box
  • What is the material of the Reolink Ethernet wiring? Is it fire-resistant? Can it be used outdoors?

    The Reolink Ethernet cable is made of copper-clad aluminum, and it is not fire-resistant. But it can be used outdoors.