If you play back the time-lapse video and feel it is not that satisfactory to you, for example, the interval between each picture captured is too long, you would probably like to delete this video.

This section serves as a guide for the above demand. It will show you how to delete time-lapse captures via Reolink App and Reolink Client.

Reolink

Camera

 Usage Types Supported Models/hardware version Whether related to the camera's own compatibility How to Operate (Click the link below to learn more)
Standalone Use Future events

All Reolink cameras are supported, except for the following:

  • Reolink Lumus (IPC_325C7）
  • Reolink Duo PoE
  • Reolink Duo WiFi
  • Reolink Duo (battery)
  • Reolink Duo 4G
  • Reolink cameras with hardware versions IPC_513/IPC_515/IPC_517
  • Reolink cameras without SD card slot.
 / Via Reolink App/Client
With Reolink NVR Existing events

RLN8-410/RLN16-410

(H3MB18, N2MB02, N3MB01, N6MB01, N7MB01)

RLN12W

RLN36

 No Via Reolink NVR Monitor
Future events

 

RLN8-410/RLN16-410

(H3MB18, N2MB02, N3MB01)

RLN12W

RLN36

 Yes

1.Connect the camera to the rouer and set up. (Battery-powered cameras are excluded)

2.If you still want to keep the camera connected to the NVR, you can add the camera to the Reolink NVR via LAN.

RLN8-410 N7MB01

RLN16-410 N6MB01

(Firmware v3.5.1)

1.Enable Hybridge mode on the Reolink NVR monitor.

2.Add the camera individually, configure via the Reolink App/Client.
With Reolink Home Hub Future events Reolink Home Hub/Home Hub Pro Yes Via Reolink App/Client

Wondering how to remove the time-lapse captures you no longer need? The links below are exactly what you need. Click it according to the Reolink software you are using: