If you have ordered Reolink Video Doorbell WiFi  camera or if you are interested in this camera model, and want to get some basic information about this product before putting it in use or placing the order, you may refer to the introduction below.

This article includes the following 4 parts which will help you quickly understand the use and working principle of the camera:

Part 1: Unboxing Video of Video Doorbell WiFi

Part 2: Product Overview

Part 3: Installation 

Part 4: Initial Setup

Unboxing Video of Video Doorbell WiFi

This video will show you what is included in the box and how to set up the camera.

Product Overview

You may find detailed information about the structure and components of the camera here.

doorbell_poe-1.png

  1. Lens
  2. Button
  3. Doorbell Status Light
  4. Chime Status Light

doorbell_poe-2.png

  1. Network
  2. Micro SD Card Slot
  3. Reset Button
  4. Binding Post

For more specifications of the Video Doorbell PoE, please refer to Specifications-Video Doorbell WiFi

Installation 

Install the Camera

Step 1. Prepare to Install

Prepare a power adapter. 

1._Prepare_DC_adpter.jpg

Step 2. Find a Place for Your Doorbell

Find a proper place for your doorbell. Do not include walls in the camera view. The walls will reflect infrared light and may cause a blurry image.

app_oi_ready_phone.png

Choose a proper height for your doorbell. You are recommended to install the camera 1.2m (48'') high off the ground, in order to get an ideal camera view.

app_oi_ready_high.png

Step 3. Use the Wedge

Check the camera view to see whether the wedge should be used to adjust the field of view. If a person standing in front of your door is near the edge of the camera's field of view, use the wedge.

app_oi_ready_angle15__.pngapp_oi_ready_angle0_.png

Step 4. Find the Place to Drill Holes

Put the mounting hole template on the wall and find the place to drill holes as shown. 

Note: The places of drilling differ when you use or don't use the wedge.

app_oi_cross_wedge.png

Step 5. Install the Wedge

Fix the wedge to the wall. If the wall is soft, screw the wedge to the wall directly. If the wall is hard, insert drywall anchors first. Drill a hole through the wall in the hollow part of the wedge to run the network cable.

app_oi_wedge.png

Step 6. Install the Mounting Plate

Screw the mounting plate into the wedge.

app_oi_wedge_2.png

Step 7. Connect the Power Adapter to Video Doorbell

Make sure the Y-shaped plugs are separate from each other.

7._connect_DC_adpater.jpg

Step 8. Fix Video Doorbell to Mounting Plate

Following the two steps above to fix the video doorbell.

app_oi_oi.png

Step 9. Finish

Press the doorbell button and check whether the doorbell and chime can ring. Check the live view on your phone.

app_oi_done.png

For more details, please refer to: 

How to Install Reolink Video Doorbell Cameras

Install Reolink Video Doorbell to Existing Doorbell Wiring

Initial Setup

Follow the guides below to finish the initial setup for your camera via both Reolink App and the Client.

  • On Reolink App

    • Step 1. Open the Reolink App, click "+" on the upright corner, and scan the QR code on the camera to add it.
      Step 2. Create the password, name the device, and then start to live view.
      For more details, please refer to How to Initially Set up Doorbell WiFi via Reolink App

  • On Reolink Client

    • Step 1. Launch the Reolink Client, click the Add button, and then find the device by scanning in LAN or by entering UID/IP.
      Step 2. Click the Add button.
      Step 3. Create a password and a name for your camera, then you will be able to live view the camera.
      To get more information, please have a look at: How to Initially Set up Doorbell WiFi via Reolink Client