If you need to use the IoT function, please make sure that your Reolink camera is one of the below-supported models.
| Cameras | Model | Compatibility |
| Battery-powered cameras | All | x |
|
WiFi/PoE cameras Note: WiFi cameras referring to the free-battery type
|
Duo Series | All cameras except Duo PoE/WiFi (1st Generation) |
| TrackMix Series | √ | |
| Doorbell Series | √ | |
| E1 Series | All cameras except hardware version IPC_523, IPC_513, IPC_515, IPC_517 | |
| FE-P/W | √ | |
| RLC-Series |
1. All cameras except hardware version IPC_523, IPC_513, IPC_515, IPC_517, IPC_3816 2. 823A/823A 16x/523WA supported, although their hardware version is IPC_523 |
|
| CX Series | √ | |
| B/D/V Series | Supported while working with NVR | |
| Lumus | x |
The cameras above could be linked with Reolink IoT devices when they work alone without NVR. Check out how to link these cameras to IoT devices via Reolink App.
Notes:
1. If your camera above does not work with IoT device, please upgrade the camera to the latest firmware version: Download Center – Reolink
2. If your PoE/WiFi camera is not on the above list, you can add the camera and the IoT device to the NVR and then set the camera to be linked with IoT devices via NVR. Check out more details: