Suppose you have ordered the RLC-1212A, are interested in this camera model, and want to get some basic information about this product before placing it in use or placing the order. In that case, you may refer to the below introduction.

This article includes the following 4 parts which will help you quickly understand the use and working principles of the camera:

Part 1: Unboxing

Part 2: Product Overview

Part 3: Installation 

Part 4: Initial Setup

Unboxing of RLC-1212A 

As soon as you receive your package, please check whether the following parts are included in the box:

mceclip0.png

Product Overview

You may find detailed information about the structure and components of the camera here.

product_view.png

1. Mount
2. Speaker
3. Metal Aluminum Case
4. Spotlight
5. IR LEDs
6. High-Definition Lens
7. Daylight Sensor
8. Built-In Mic

SD_card_slot.png

1. Micro SD Card Slot

ports.png

1. Power
2. Reset Button
3. Network
4. Waterproof Lid

For more specs, please refer to Specifications

Installation of RLC-1212A

Camera Installation

Please refer to the below steps to install the camera with the mount.

Step 1. Drill holes in accordance with the mounting hole template.

510A-1.png

Step 2. Install the mount base with screws included in the package. Run the cable through the cable notch on the mount base.

510A-2_.png

Step 3. To get the best field of view, loosen the adjustment knob on the security mount and turn the camera.

510A-3.png

Step 4. Stiffen the adjustment knob to lock the camera.

510A-4.png

SD Card Installation

Please refer to the below steps to install the SD card on your camera.

Step 1. Find the micro SD card slot and unscrew the screws to open it.

SD_card.png

Step 2. Insert the micro SD card, please use your fingernail (or use the provided reset needle) to push the micro SD card in until you feel it is locked, and you will hear a click sound and the micro SD card will not pop out if the camera is inserted in properly.

Step 3. Screw the screws to close the cover tightly. 

Initial Setup

Please power on your camera properly before the initial setup, and refer to the steps below.

  • On Reolink App

  • On Reolink Client

    • Step 1. Launch the Reolink Client, click the Add button and then find the device by scanning in LAN or entering UID/IP.
      Step 2. Click the Add button.
      Step 3. Create a password and a name for your camera, then you will be able to get the live view of the camera.
      To get more information, please have a look at How to initially Set up PoE Cameras via Reolink Client (New Client)