If you have ordered an RLN8-410 or are interested in it, and want to get some basic information about this product before placing it in use or placing the order, you may refer to the below introductions.

This article includes the following 4 parts which will help you quickly understand the use and working principles of the NVR:

Part 1: Unboxing

Part 2: Product Overview

Part 3: Installation 

Part 4: Initial Setup

Unboxing for RLN8-410

what_s_in_the_box_rln8-410.png

Product Overview

You may find detailed information about the structure and components of the NVR below. 

RLN8-410_front.png

  1. USB Port
  2. Power LED/HDD LED
  3. Control Panel

RLN8-410_back.png

  1. On/Off Switch
  2. eSATA
  3. RJ45
  4. Power Input
  5. Audio Out
  6. USB Port
  7. HDMI Port
  8. VGA Port
  9. Network

Installation

You can connect either hard-wire the PoE cameras or connect WiFi cameras wirelessly (except for battery-powered cameras) to the NVR. Below is a common network topology of the connection. 

poe-nvr-connection.png

For more instructions on the configurations, you may refer to the sections Wired Connection and Wireless Connection

Wired Connection

Applies to cameras that are hard-wired to the NVR. 

Step 1. Connect your Reolink IP cameras to the Reolink PoE NVR. 

Step 2. Log into your NVR, and go to the IP channel.

Old UI: 

auto-add_old.png

New UI:

auto_add_new.png

Step 3. Select Auto Add so that all the cameras in the same LAN can be automatically shown on the list.

Step 4. If you have never changed the password of the IP cameras (the default password of the IP camera is blank) and there are enough channels for all the cameras, you may press Apply to add all the IP cameras to the NVR.

Step 5. If you have changed the User Name and the Password of your cameras, please put the password of the camera to log in.

Old UI:

Please drag the menu bar to the password column and use the soft keyboard to input the required information.

Input-Password_old.jpg

New UI:

Please click Modify to input the required information.

channel_management_new.png

Step 7. Click Apply to save and apply the configuration.

Wireless Connection

Applies to wifi cameras (except for battery-powered cameras) attempting to add to the NVR. 

Step 1. Connect the WiFi camera to the same LAN as the PoE NVR.

Step 2. Connect the camera to the WiFi of the router. 

Step 3. Add the camera to the PoE NVR: Toggle the "Auto add" on and hit "Modify" to input the login credentials. 

Old UI:

old_add%2Bpassword.png

New UI:

add%2Bpassword_new.png

For more detailed instructions, you could refer to the articles below:

Initial Setup

You can do the initial setup on a monitor or TV connected with an HDMI/VGA cable, or through the Reolink App or Reolink Client.  

  • On Monitor

    Step 1. Connect the NVR to a Monitor or TV via the VGA or HDMI cable.
    Step 2. Connect the camera’s RJ45 network socket to any PoE Camera port on the NVR using the Ethernet cables provided.
    Step 3. Connect an Ethernet cable from the LAN port of the NVR to the LAN port of your router.
    Step 4. Connect the mouse to the USB port.
    Step 5. Connect the Power Adapter. Please use the supplied power adapter. For the PoE NVR device, it is 48 volts.
    Step 6. And then you will see the below splash screen. System booting up might take a few seconds.
    Step 7. Follow the Setup Wizard to set your NVR, click Next to continue and at the last step, click Finish to save all the settings.

    For more detailed instructions, you may refer to the articles below:
    How to Do Initial Setup for PoE NVR with Monitor Connected (Old UI) 
    How to Initially Set up PoE NVR with Monitor Connected (New UI) 

  • On Reolink App

    Step 1. Power the camera and the NVR, then launch the Reolink App on your phone.
    Step 2. During start-up, you will find the NVR shown on the Delive List automatically on Reolink App.
    unitialized.png

    Step 3. Click the device you want to add to start initialization.
    device_initialization.png

    Step 4. For security considerations, you need to create a password for the first time.
    Step 5. Then name your device and modify other settings on the second step page.
    For more detailed instructions, you may refer to the article: How to Do Initial Setup for Reolink NVR via Reolink App.

  • On Reolink Client

    Step 1. Click the "+" icon, select UID, then fill in the blanks with the UID number of your NVR, See How to find the UID of your device.
    add camera new client by uid.png
    Step 2. Create a device password, then click Next.
    Step 3. Create a device name then click Finish.
    For more detailed instructions, you may refer to the article: How to Initial Set up NVR via Reolink Client (New Client).