If you have no idea about the meaning of the status light on your video doorbell PoE / WiFi camera, check the following introduction.
Applies to: Video Doorbell PoE, Video Doorbell WiFi
Why is the doorbell status light white?
When Reolink Video Doorbell is only connected to power, the doorbell status light is white.
When the doorbell is connected to both power and the network, the doorbell status light is blue.
Please check the network connection if the doorbell status light is white.
Doorbell Status Light Guide
Status Light State |
Meaning |
|
White Solid (Short) When the video doorbell is powered and starting up, the status light will be solid white for a short time until the video doorbell starts up successfully. |
|
White Solid The doorbell status light can be set to solid white at night via Reolink app. |
|
White Clockwise Spinning The doorbell button is pushed while the network is disconnected. |
White Blinking The doorbell is started up but not connected to the network.
|
|
|
White Breathing The video doorbell detects a person or motion while the network is disconnected. |
|
Blue Clockwise Spinning The doorbell button is pushed. |
Blue Solid The 2-way audio function is being used. |
|
|
Blue Blinking Upgrading firmware. |
|
Blue Breathing The video doorbell detects a person or motion. |
Comments
0 comments
Article is closed for comments.