This article is about searching logs on Reolink NVRs.
Applies to: RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01/NVR_NNT3NA78P), RLN16-410 (hardware version H3MB18/N6MB01/NVR_NNT4NA716P), RLN36, NVS36, RLN12W, NVS12W, RP-PN8, RP-PN16.
Step 1. Log in to your NVR on the monitor, right-click the Live View page on the monitor screen, and then click the Settings button to enter the main menu page.
Step 2. Go to System > Maintenance > System Log.
Step 3. Click the Last Week window to get a drop-down list, then you can check logs from different periods.
There are some main types of logs, including Startup, Login, Logout, Maintain, and Restart.
| Minor Type | Description |
|---|---|
| Startup |
NVR was powered on and started up; NVR has completed the reboot and started up successfully. |
| Maintain | A scheduled maintenance reboot has been initiated. |
| Restart | NVR started the reboot process. This includes both manual restarts initiated by the user through the interface and automatic restarts triggered by maintenance tasks, such as firmware updates, restoring settings, or scheduled reboots. |
| Login | A user logged in to the NVR. |
| Logout | A user logged out of the NVR. |
If you need further assistance, you can click "Submit a Request" below for more information.