Reolink NVR supports Theme Mode, allowing you to switch between Dark Mode and Light Mode based on your preference. This guide walks you through setting up Theme Mode in the Reolink interface on compatible Reolink NVR models.
Applies to: RLN8-410 (N7MB01 / NVR_NNT3NA78P), RLN16-410 (N6MB01 / NVR_NNT4NA716P), NVS8 (N7MB01 / NVR_NNT3NA78P), NVS16 (N6MB01 / NVR_NNT4NA716P), RLN12W, NVS12W, RLN36, NVS36, RP-PN8, RP-PN16
Note: Firmware needs to be upgraded to version v3.6.4 or later.
Preparation: Connect a TV/Monitor to the NVR via HDMI/VGA cable.
Follow the steps below to switch the display theme on your Reolink NVR:
Step 1: On your NVR interface, navigate to Settings > System > General.
Step 2: Locate the Select a Theme option. Choose either Dark Mode or Light Mode according to your preference.
Dark Mode uses a dark background, which is easier on the eyes in low-light environments. Dark mode is the default.
Light Mode uses a light background, which works well in bright environments.
Once selected, the theme will be applied immediately — no reboot required. The Theme Mode setting only affects the NVR interface. You can switch between themes at any time by repeating the steps above.
Should you have any inquiries or require further assistance, please click on "Submit a Request" below to contact the Reolink Support team.