You can refer to the guide below if you need to reset Reolink TrackFlex Floodlight Series camera to the factory default settings.
Applies to: Reolink TrackFlex Floodlight WiFi.
Step-by-Step to Reset the Reolink TrackFlex Floodlight Series Camera
Step 1. Open the black cover at the top of the camera when it is powered on.
Step 2. Press down the reset button in the reset hole with the reset needle or a paperclip and hold for over 5 seconds, until you hear a short ringtone from the camera. Then release the reset button.
Step 3. Put the cover back on.
After resetting your Reolink TrackFlex Floodlight series, the device will return to its factory default settings and needs to be set up again in the Reolink App. Make sure the camera is powered on and follow the in-app setup instructions to complete the configuration.
For TrackFlex Floodlight WiFi, please refer to How to Configure Wi-Fi Connection for Reolink Cameras via Bluetooth to complete the initial network setup.
If you have any questions, click “Submit a request” below to contact the Reolink Support Team.
Related Articles
Power & Connection Tips for AC-Powered Reolink Cameras
How to Configure Wi-Fi Connection for Reolink Cameras via Bluetooth